Certifications
Tests, reports and audits
Everything below is transcribed from our own test documents and catalogues. Where a report number or scope could not be read reliably from the source, it is marked as pending verification rather than quoted as fact.
Scope note - please read before quoting a level
The SGS reports we hold and cite are titled “Protective Gloves against Mechanical Risks” and reference EN 388. EN 388 is the mechanical-risk standard for protective gloves; the tested sample (glove, fabric or finished garment) and the report scope must be confirmed against the certificate originals before an EN 388 level is claimed for a specific garment. We therefore publish EN 388 figures as test data rather than as a garment-level certification, and we confirm the exact scope in writing with each quotation.
The catalogue also uses two different year designations for the same standard (EN 388:2018 in one section, EN 388:2016 in another). The applicable edition will be stated on the order confirmation once the certificate originals are reconciled.
Report schedule
Certification and test register
Every entry lists the issuing body, report number, standard, result, date and where it appears in our documentation.
| Issuing body | Report / certificate no. | Standard | Result | Date | Source |
|---|---|---|---|---|---|
| SGS | SL52405273857301TX | EN 388:2016+A1:2018 (clause 6.2, puncture) | Recommended level 4 | 2026-03-12 | Certificate images 1 & 2 |
| SGS | SL52405286667501TX | EN 388 (mechanical risks, shown as report 2 of 2) | To be verified against the original (fine print in the image) | 2026-03-12 | Certificate images 1 & 2 |
| SGS | Number to be verified (image reads either SL5195865...80473 or SL5171508680473) | EN 388 clause 7, blade cut | Performance level 5 | 2018-07-18 | Certificate images 1 & 2; Catalogue B p35 |
| SGS | Same batch (two reports, 1 of 2 and 2 of 2) | EN 388 mechanical risks: cut and puncture | Cut level 5; the puncture table shows values including 4 and 1 | 2018-07-18 | Catalogue B p35 |
| CITC (report bears CNAS / ILAC marks) | Fine print to be verified | Not stated | Not stated | Not stated | Catalogue B p35 |
| Chinese test report | Report number to be verified (reads '...2171 No. 329') | Not stated | Sample: soft bulletproof vest, model FDY2R-GJ01, commissioned inspection | Not stated | Catalogue A p13 |
| Third-party test house | S250403322_1 | EN ISO 11393-2:2019 | PASS, class 1 at 20 m/s (chainsaw trousers) | Not stated | Catalogue A p11 |
| Official / industry standards (police line) | - | GA 68-2024; NIJ 0115.00; GA 141-2010 level II / III; NIJ 0101.07 | Catalogue states certification with 20 public security bureau systems | - | Catalogue A p12 |
| EN 388 across the product line | - | EN 388:2018 | Puncture level 4 (highest); cut level 5; abrasion level 4 (highest); tear level 4 | - | Catalogue A p3, p8 |
| NIJ (stab-proof vest) | No report number provided | NIJ 0115.00 | NIJ test report held | - | Catalogue A p8 |
| Fabric / garment certification | - | EN 388; EN 420; CE marking | White stab-resistant vest | - | Catalogue B p21 |
| Factory audit | - | BSCI and SEDEX | Factory audit passed | - | Catalogue B p21 |
| Basic safety category | - | GB 18401-2010 class B | Reflective stab-resistant vest (basic safety category, not a stab-performance standard) | - | Catalogue B p23 |
| Standard conformity | - | EN 388:2016; GA 68-2024 | Cut level 5 / stab level 4 / tear level 4 / abrasion level 4 | - | Catalogue B p24 |
Quality system
Factory audits and product liability cover
Beyond product testing, our manufacturing sites are audited and insured.
BSCI & SEDEX
Our catalogue states that the factory has passed BSCI and SEDEX social compliance audits. Signed audit reports are shared with buyers during onboarding.
CNY 5,000,000 cover
Product liability insurance with a sum insured of CNY 5,000,000 supports institutional and tender procurement.
Standard authorship
In 2026 the company led the drafting of China’s first flexible cut and stab protective apparel standard, T/CNGA 88-2026, cited on our 4-in-1 flagship vest.
Next step
Request the certificate pack
Tell us which styles and levels you are evaluating. We send the matching test reports, audit certificates and material data sheets.